FoxFirearms are proud to supply Seb Coaxial rests, we feel their range of products will further enhance our rifles, allowing the shooter to achieve their full potential. If you require any further information for these products please contact me directly using the details above. We are able to supply both the Seb Front Rest and Seb Rear Bag

Seb Coaxial Front Rest

The SEB rest is custom made and intended to fill the needs of the most discriminating shooter with excellent design, function, and quality.

  • The innovative "dual post" and "pivotal base" design gives advantages on the pedestal configurations. The rest can be turned and used in any direction and on how you would move the joystick. This is a new concept and the only one in the world!
  • The dual post coaxial mechanism allows shooter the choice of moving the joystick and the rest top in the same direction, or the opposite direction, simply by attaching the joystick to the opposite side of the coaxial unit.
  • Rock solid construction throughout.
  • About 33 M.O.A. *(the 2007's production even has about 40 M.O.A.) - either for vertical or horizontal.
  • Extremely smooth operation. It's the finest & smoothest in the market!
  • Joystick sensitivity can be adjusted easily to individual's preference.
  • No creep or backlash in its movement. The mechanism will remain stationary during recoil, even if you "let go" of the joystick. *The tension is factory set to accept minimum of 13 lbs weight on the rest top.
  • A built in bubble level located on the rear bar of the rest top.
  • An adjustable fore end stopper with rubber "O" rings protection. The stopper is secured to the front bar of the rest top.
  • The solid base has a large footprint, of appropriate thickness and weight. The base blends together with the pivotal base & the coaxial unit to have a perfect balance of weight and stability.
  • Innovative carrying handle on the base to ease transport and for comfortable handling.
  • Hardened tool tip insert on each of the base leveling/elevation screw.
  • Comfort & knurled "knob" on the leveling screws and the hold down screws.

POA

Approximate Measurements : All screws are in standard Metric.
Base = 32 cm x 38 cm x 3 cm thick (12 1/2 x 15 x 1 1/5)
Rest (assembled) =  32 cm x 38 cm x 17 cm (12 1/2 x 15 x 7)
Rest top (inner measurements) = 5,7 cm x 15 cm (2 x 5 3/4)
Joystick = 1,27 mm x 28 cm long (1/2 x 11)

Seb Regular Rear Bag

  • Selected genuine leather.

  •  Double wall construction.

  •  Integral rubber/neophrene base with corrugated bottom surface.

  •  Solid throughout, no rocking etc.

  •  Features a carrying strap to ease transport and handling.

  •  Extra large sand fill holes to ease and charge sand to the bag faster.

  •  Brown-Black is standard. Other height, or "flat"(spacing) between ears is available on request.

POA
Approximate Measurements :
Foot print = 14 cm x 18.5 cm ( 5 1/2" x 7 ½" )
 Thickness of base = 22 mm ( 7/8" )
Standard height between ears = 10 cm ( 4" )
Standard "flat" between ears = 10 mm ( 3/8" )
 Standard height of ears = 5 cm  ( 2" )
 Approximate Weight : Empty = 0,75 kgs ( 1.65 lbs )Charged = 5,5 - 6 kgs ( 12 - 13 lbs )  *heavy sand is recommended.